Extractor hood designed for capturing water vapour and steam. Features a self-condensation system that eliminates the need for external air exhaust.
Available in wall-mounted format.
Search products by name
Exhaust hoods | Morgui
Vapor Frig Hood
Suitable for washing areas
With cooling plate
Fans included
100% STAINLESS STEEL AISI 304
The ultimate solution for extracting vapour from dishwashers, wash tunnels, bain-marie cooking, and other applications that generate steam.
Main features
The hood is equipped with an internal triple-labyrinth system that creates multiple accelerations and 180° turns, enhancing the impact of vapours against the internal surfaces. This dynamic, combined with a cooling plate, accelerates the condensation process thanks to the strong thermal contrast.
It incorporates two fans that drive the vapours towards the filtration system, allowing excess air to be vented into the false ceiling or the room itself.
Dimensions
Length: according to customer requirements. Depth: minimum 1,000 mm. Hood height: 430 mm. Top trim: 240 mm.
Formats
Wall-mounted.
Materials
Visible parts made of 1 mm thick AISI 304 stainless steel sheet. External non-visible tubular structure made of galvanized steel.
Construction
Hood fully welded in a single piece up to 6.5 m. Built with an external non-visible tubular frame that provides greater strength to the whole unit, with no visible screws or joints that could cause dripping or dirt accumulation. All edges of the steel sheets are double-folded to prevent cuts, and the lower edge of the front panel is rounded to avoid accidental impacts.
It features a triple labyrinth and a cooling plate inside that act as filtration and condensation elements. It also includes two built-in fans that drive the steam through the condensation circuit and subsequently allow air evacuation.
Custom-built on request, with all types of adaptations for beams, columns, and other structural elements.
Standard finish
Satin finish on all visible stainless steel surfaces. Includes the Morgui logo on the left side of the front. Air supply is provided through perforations on the front. See the customization section for all available configuration and adaptation options.
Morgui hoods are delivered ready for easy installation: with slots and welded threaded plates, and wall or ceiling supports to aid attachment to the building structure. These elements serve as a base, but final installation requires additional materials and fixings depending on each project.
Drainage
Grease collection channel fully welded around the entire perimeter of the hood and connected to the main tray. The tray includes a drainage plug.
