Extractor hood designed with integrated air supply and optional air induction system for cooking areas that produce a lot of smoke. Welded in a single piece up to 6.5 meters in length.
Available in wall-mounted and central formats.
Search products by name
Exhaust hoods | Morgui
Garós Hood
Suitable for low ceilings
With air supply
Available with air induction
Optional LED lighting fixtures
Extractor hood designed with front air supply and optional air induction system for kitchens with limited height.
Main features
Extractor hood welded in a single piece up to 6.5 m in length. Compact model for kitchens that do not have sufficient height to incorporate an air supply plenum and in some cases also air induction.
Interior air induction represents 15% of the total supplied air, preventing smoke leakage from the extraction area.
Dimensions
Length: according to customer requirements. Depth: minimum 800 mm for wall-mounted format and 1,200 mm for central format. For models with air induction, the minimum wall-mounted length is 1,000 mm. Hood height: 400, 500, or 600 mm.
Formats
Wall-mounted or central.
Materials
Made of 1 mm thick AISI 304 stainless steel sheet. External non-visible tubular structure and ceiling made of galvanized steel.
Construction
Hood fully welded in a single piece up to 6.5 m. For larger sizes, the construction is modular. Manufactured with an external non-visible tubular structure that provides great robustness to the assembly, with no visible screws or joints that could cause dripping or dirt accumulation. All sheet metal edges have double folds to prevent possible cuts. The lower edge of the front is rounded to avoid accidental impacts.
Internal induction through a longitudinal nozzle at the front, which propels air at low velocity to help guide smoke toward the filter collector, preventing its escape from the front of the hood.
All extraction plenums include removable balancing dampers. The supply plenum features internal insulation to prevent condensation. Custom-built on demand, with all kinds of adaptations for beams, columns, and other structural elements.
Standard finish
Satin finish on all visible stainless steel surfaces. Includes the Morgui logo on the left side of the front panel. Air supply is provided through perforations on the front. See the customization section for all available configuration and adaptation options.
Morgui hoods are delivered ready to facilitate installation: with welded slots and threaded plates, and wall or ceiling supports to help fix them to the building structure. These elements serve as a base, but final installation requires additional materials and fixings according to each project.
Drainage
Grease collection channel fully welded around the entire perimeter of the hood and connected to the main tray, at the bottom of the filter collector. The tray includes a drainage plug.
Filters
AISI 430 stainless steel plate filters, glossy (e=0.4). Standard DIN 18869-5:2007-08. Included with the hood. Size according to model/height.
Garós 4
Height: 400 mm with 490×400×50 mm filters.
Garós 5
Height: 500 mm with 490×490×50 mm filters.
Garós 6
Height: 600 mm with 490×490×50 mm filters.
