Extractor hood with an air induction system for the most demanding professional kitchens that produce large amounts of smoke. Welded in a single piece up to 6.5 meters in length and 50 cm in height.
Available in wall-mounted and central formats.
Search products by name
Exhaust hoods | Morgui
Indok Hood
The all-inclusive model
With air induction
With exhaust & air supply plenums
Optional LED lighting fixtures
The most complete and efficient hood for high-performance kitchens, with 15 % of the total supplied air inducted to direct smoke towards the filters.
Main features
Extractor hood welded in a single piece up to 6.5 m in length. Especially recommended for high-production kitchens, thanks to its high smoke retention capacity through air induction.
It includes an extraction plenum with removable balancing dampers, as well as a supply and induction plenum. The latter can be independent for air supply, allowing for kitchen climate control.
Dimensions
Length: according to customer requirements. Depth: minimum 1,000 mm for wall-mounted format and 2,000 mm for central format. Hood height: 500 mm. Recommended plenum height: from 200 to 400 mm.
Formats
Wall-mounted or central.
Materials
Visible parts made of 1 mm thick AISI 304 stainless steel sheet. Non-visible external tubular structure and ceiling made of galvanized steel.
Construction
Hood fully welded in a single piece up to 6.5 m. For larger sizes, the construction is modular. Manufactured with an external non-visible tubular structure that provides great robustness to the assembly, with no visible screws or joints that could cause dripping or dirt accumulation. All sheet metal edges have double folds to prevent possible cuts. The lower edge of the front is rounded to avoid accidental impacts.
Internal induction through a longitudinal nozzle at the front, which propels air at low velocity to help guide smoke toward the filter collector, preventing its escape from the front of the hood.
All extraction plenums include removable balancing dampers. The supply plenum features internal insulation to prevent condensation. Custom-built on demand, with all kinds of adaptations for beams, columns, and other structural elements.
Standard finish
Satin finish on all visible stainless steel surfaces. Includes the Morgui logo on the left side of the front panel. Air supply is provided through perforations on the front. See the customization section for all available configuration and adaptation options.
Morgui hoods are delivered ready to facilitate installation: with welded slots and threaded plates, and wall or ceiling supports to help fix them to the building structure. These elements serve as a base, but final installation requires additional materials and fixings according to each project.
Drainage
Grease collection channel fully welded around the entire perimeter of the hood and connected to the main tray, at the bottom of the filter collector. The tray includes a drainage plug.
Filters
AISI 430 stainless steel plate filters, glossy (e=0.4), 490×490×50 mm. Standard DIN 18869-5:2007-08. Included with the hood.
