Extractor hood specially designed for the removal of smoke generated by industrial ovens. Welded in a single piece up to 6.5 m in length, with an inverted filter collector.
Available in wall-mounted and central formats.
Search products by name
Exhaust hoods | Morgui
Horno Hood
Ideal for ovens
With inverted filters on the front
Optional air supply plenum
Optional exhaust adjustable plenum
The most suitable hood for capturing smoke when opening oven doors, industrial cooking kettles, and tilting pans.
Main features
Morgui industrial extractor hood specially designed for ovens. The filter collector is located at the front of the hood to capture the smoke released when the ovens are opened.
Compatible with the addition of an extraction plenum with removable regulation dampers, as well as a front air supply plenum through perforations.
Dimensions
Length: according to client requirements. Depth: minimum 1,200 mm for wall-mounted format and 1,500 mm for central format. Hood height: 300, 400, or 500 mm. Recommended plenum height: 200 to 400 mm.
Formats
Wall-mounted or central.
Materials
Visible parts made of 1 mm thick AISI 304 stainless steel sheet. External non-visible tubular structure and ceiling made of galvanized steel.
Construction
Hood fully welded in a single piece up to 6.5 m. For larger sizes, the construction is modular. Manufactured with an external non-visible tubular structure that provides great robustness to the assembly, with no visible screws or joints that could cause dripping or dirt accumulation. All sheet metal edges have double folds to prevent possible cuts. The lower edge of the front is rounded to avoid accidental impacts.
The filter collector is located at the front of the hood.
All extraction plenums include removable balancing dampers. The supply plenum features internal insulation to prevent condensation. Custom-built on demand, with all kinds of adaptations for beams, columns, and other structural elements.
Standard finish
Satin finish on all visible stainless steel surfaces. Includes the Morgui logo on the left side of the front panel. Air supply is provided through perforations on the front. See the customization section for all available configuration and adaptation options.
Morgui hoods are delivered ready to facilitate installation: with welded slots and threaded plates, and wall or ceiling supports to help fix them to the building structure. These elements serve as a base, but final installation requires additional materials and fixings according to each project.
Drainage
Grease collection channel fully welded around the entire perimeter of the hood and connected to the main tray, at the bottom of the filter collector. The tray includes a drainage plug.
Filters
AISI 430 stainless steel plate filters, glossy (e=0.4). Standard DIN 18869-5:2007-08. Included with the hood. Measure depends on the model/height.
