Belt-driven centrifugal fans, double inlet with action impeller, for airflows up to 180,000 m³/h.
Search products by name
Fans & ventilation units | Morgui
Nicotra AT Fans
ATEX Opctional
Fans designed for industrial ventilation and air conditioning systems, offering easy installation, high efficiency, and low noise impact.
Main features
Este tipo de ventiladores está especialmente concebido para ventilación mecánica, a temperaturas de 20 °C a +40 °C en los modelos S, SC, G2L y SC2, o hasta 100 °C en los modelos AR, TIC, G2C, G2C-C2, G3C y G3C-C2. Los datos de rendimiento de aire y sonido se han obtenido en un laboratorio registrado por AMCA según la norma AMCA 210/99 para pruebas de rendimiento de aire, y se encuentran dentro de las tolerancias permitidas por la norma DIN 24166 para Clase 2.
Material
Galvanized steel.
AT-S (Simplex)
Light construction, without feet and outlet flange.Light-duty bearing and pressed steel bearing supporting brackets.
AT-SC
With rectangular side frame and without outlet flange.Light-duty bearing and pressed steel bearing supporting brackets. C version has also three steel bars with the ends welded to three corners of both the side frames.
AT-AR
With heavy duty reinforced side frames, joined by three steel bars in three corners and without outlet flange. Medium duty bearing inside lubricatable, cast iron pillow block, mounted on a robust cross-bar.
AT-TIC
With heavy duty reinforced side frames, joined by four steel bars in four corners and without outlet flange. Medium-heavy duty bearing inside lubricatable, cast iron pillow block, mounted on a robust cross-bar.
AT-G2L
Two S-version single fans joined together by three U-section spars. The two impellers are mounted on a common shaft, supported by three bearings.
AT-SC2
Two SC-version single fans joined together by three L-section spars. The two impellers are mounted on a common shaft, supported by three bearings.
AT-G2C
Two single fans mounted side-by-side inside a common supporting frame of three L-section spars. The two impellers are mounted on a common shaft, supported at the ends by just two bearings.Use of hollow shafts on the larger sizes.
AT G2C-C2
Mechanically similar to G2C fans but stronger, thanks to the use of hollow shafts with larger diameter (45 mm) journals and plummer blocks with heavy-duty bearings.
AT-G3C
Three single fans mounted side by side within a common support frame made of three L-shaped beams. All three impellers are mounted on a common shaft.
